Place of Origin:
SHANDONG WEIFANG
Brand Name:
HUAYU
Certification:
CE,ISO9001
Model Number:
IBC-3
IBC Blow Moulding Machine 3 layers for Specific Production Requirements
Screw:According to the processing performance of the raw material, the diameter:Φ 120*1/110mm*2(Compared to other manufacturers, the screw has a larger model and higher extrusion stability. It adopts Huayu patented design with good plasticization effect and high output, and the product is glossy) the L/D ratio :30:1, the material is 38CrMoAlA, the hardness ≥ 800, and the brittleness ≤ grade 2;
Barrel:High quality nitriding structural steel 38CrMoAlA, material 38CrMoAlA, nitriding treatment, hardness HV ≥ 900, brittleness ≤ grade 2;
Driving mode:AC motor +harded gear reducer E2HH55,2/E2HH54.2(Using the world's top gearbox manufacturer, the German Flanders gearbox, compared to other manufacturers, it has a larger model, longer usage time, lower maintenance rate, low noise, and high product stability.)
Driving power: AC 110kw*1/90kw*2(Adopting Siemens motors with low energy consumption and high stability)
Plasticizing capacity: About 700kg/h
Heating mode:Cast aluminum heater,14 section temperature control of each extruder,heating power is 70kw
Temperature control: Modular temperature control
Cooling mode: The feed section is water-cooled, Other sections is Automatic air cooling:
Die head system
Huayu patent technology 3 layers storage cylinder die head
Die head number:1
Maximum diameter of extrusion outlet:700mm
Heating mode:Using nano insulation material heating ring,8-stage temperature control, with a total heating power of 60 kW; Temperature control:Modular temperature control
Clamping system
Adopting a dual linear guide rail translation mold system, with dual oil cylinders for quick mold closing and three oil
cylinders for strong mold locking structure, the force is balanced, the deformation is small, and the mold movement is fast
and stable;
Platen size(W*H): H1700mm×W1800mm*90mm
Distance between platens: 1100-2500mm
Max. mould size(W*H): 1500mm×1700mm
Mould Thickness: 1250mm
Clamping force: 2800KN
|
Energy configuration |
Extruder driving power |
110KW*1 90kw*2 (Adopting Siemens drivers with low energy consumption and high stability) |
|
Hydraulic main system motor power |
48KW Servo motor (Driven by China Huichuan servo motor) |
|
|
Wall thickness control motor power |
11kw (Wall thickness servo drive with high flow rate, fast response speed, and precise tracking curve) |
|
|
Heating power of extrusion system |
14pcs 5KW/pc |
|
| Power of die heating |
8pcs ,6KW/pc |
|
| Air Supply |
0.8×6(MPa *cubic meter per minute) |
|
| Cooling Water Consumption |
0.3×20°×30(MPa × degree × Cubic meter per hour) |
|
| Total power | 467KW | |
|
Average energy consumption(AEC)
|
About 230kw per hour |
Send your inquiry directly to us
